NEWS

Microcement is a coating that is experiencing exponential growth in its decorative use, we find it as a coating for all types of floors, furniture and countertops, it is becoming more and more present both in private homes and commercial premises.

Know the times to achieve the finish you want once the application of our TOPCRET microcement formula is finished:

  • 24 hours for transit free
  • 48 hours for the coating to be waterproof
  • 5 days to reach 75% hardness and allow transit on heavy pieces (furniture, etc.)
  • 21 days for total hardness and drying.


5 TIPS TO CLEAN MICROCEMENT SURFACES
Below we detail what are the most important tips about microcement cleaning:

First 72 hours
When 48 hours have elapsed since the application of the sealant, it will be possible to have contact with the surface, but carefully. It is recommended to wait up to a week after this application and avoid the traffic of people in the case of floors.

Another tip is to avoid washing it especially with abrasive products and spilling liquids on surfaces with recent coatings can also degrade the finish of the cover.

It is also worth noting the importance of allowing air to circulate in the environment so that the water vapor produced by the condensation of this material does not affect its settlement.

In the first week after the application of the microcement, it is very important not to clean it under any circumstances.
And it is that during the drying of the microcement it is essential to ventilate the room so that it dries correctly before carrying out any cleaning work. Pouring any type of liquid on it could change the color of the microcement or cause the surface to lighten.

Contact with the microcement should also be avoided until it dries, the temperature should also be controlled so that it is above 15ºC at all times.

Once the first week has elapsed after the application of the microcement, the surface of the microcement can be cleaned very gently using only water.
Why? It is necessary to wait for the porosity of the microcement to close completely, and this only happens after the first seven days.

If cleaning is needed, it can be done with neutral PH solutions, alcohol and liquid soap.In short, it is best that during the first month all possible precautions are kept. This period of time is critical to achieve optimum settling of the material.
Do not use abrasive or aggressive products such as solvents, abrasive cleaners or strong chemicals under any circumstances. In the case of doing so, the microcement surface could be seriously damaged.

SPECIALIZED PRODUCTS FOR CLEANING MICROCEMENT
Although water and neutral soap is enough to clean the microcement, there are also other products that we can use for cleaning, some are alkaline products which require protection when used or also opt for less industrial products that we can buy in warehouses or stores. specialized.

RECOMMENDATIONS

  • Avoid puddles and humidity
  • Microcement is not compatible with continuous water exposure as this could erode its seal and lead to water leaks.
  • It is important to carry out regular maintenance on this type of surface using acrylic waxes.
  • We must avoid elements that can scratch it. As could be the grains of sand or small stones. When driving through them or cleaning them, care must be taken not to drag these elements that could harm their appearance.

PRINCIPALES BENEFICIOS

FICHA TÉCNICA

Resistencia a la adherencia, UNE-EN 13892-8:2003>3,3 N/mm2
Dureza Superficial, UNE-EN 13892-6:2003 120 N/mm2
Determinación del índice de transmisión de agualíquida (permeabilidad) UNE-EN 1062-3:20080,01 kg/m2 h0,05
Determinación de las propiedades de flexión UNE-EN ISO 178:20031,3 kN/mm2
Resistencia al impacto, UNE-EN ISO 6272:2012>14,7 NmA
Altura de caída a la que se observan las primeras fisuras:1500 mm
Diámetro producido a esta altura: 9,5 mm
Resistencia al desgaste BCA, UNE-EN 13892-2:2003 30 µm

WARRANTY

Topcret® commits to repair or replace at no cost for a period of 3 years any type of defect that may arise. Warranty also extends to the application process.

Topcret has an exclusive rework insuarance,through which you can access a lifetime bonus to redo your work whenever you want. This insurance covers all those cases that are not covered by the Zero Cost Guarantee, even if there were no defects or accidents, such as changing the color of the applied coating.

WARRANTY

Topcret® commits to repair or replace at no cost for a period of 3 years any type of defect that may arise. Warranty also extends to the application process.

Topcret has an exclusive rework insuarance,through which you can access a lifetime bonus to redo your work whenever you want. This insurance covers all those cases that are not covered by the Zero Cost Guarantee, even if there were no defects or accidents, such as changing the color of the applied coating.

ON SCHEDULE

The installation process is carried out with our own applicators, trained in our academy.

This allows us to guarantee the result and compliance with the agreed delivery times. In addition, we are manufacturers, so we sell only products that we have in stock.

ON SCHEDULE

The installation process is carried out with our own applicators, trained in our academy.

This allows us to guarantee the result and compliance with the agreed delivery times. In addition, we are manufacturers, so we sell only products that we have in stock.

BUDGET WITHOUT SURPRISES

The commercial process includes on site visits by our trained applicators, we make sure that what was agreed is what will finally happen. No surprises, no hidden fees.

BUDGET WITHOUT SURPRISES

The commercial process includes on site visits by our trained applicators, we make sure that what was agreed is what will finally happen. No surprises, no hidden fees.

Descarga nuestro brochure

Todas las especificaciones técnicas que necesitas

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
DOWNLOAD OUR BROCHURE

All the technical specifications you need

Contacto (EN)

"*" indicates required fields

1Contact Information
2Inquiry

Descargar Brochure

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

PRINCIPALES BENEFICIOS

Resistencia al rayado

Baxab® garantiza un valor de 120N/mm2, lo que significa que es más resistente que cualquier suelo de madera (incluido el parquet), resina, microcemento, compuesto autonivelante o incluso hormigón pulido.

Resistencia al impacto

Con un valor de >14,7 Nm, Baxab® tiene la capacidad de absorber el impacto de objetos punzantes resultando en una mínima pérdida de forma, a diferencia del mármol, porcelana o baldosas cerámicas, donde dicho impacto astillaría el material, causando una pérdida de color o incluso rompiendo la superficie.

FICHA TÉCNICA

Resistencia a la adherencia UNE-EN 13892-8:2003-3,3 N/mm²
Dureza superficial, UNE-EN 13892-6:2003120 N/mm²
Determinación del índice de transmisión de agua líquida (permeabilidad) UNE-EN 1062-3:2008 0,01 kg/m² h0,05
Determinación de las propiedades de flexión, UNE-EN ISO 178:20031,3 kN/mm²
Resistencia al impacto, UNE-EN ISO 6272:2012 >14,7 Nm
Altura de caída a la que se observan las primeras fisuras A 1500 mm
Diámetro producido a esta altura 9,5 mm
Resistencia al desgaste BCA, UNE-EN 13892-2:2003 30 µm
Determinación de las resistencias químicas, UNE-EN 13529:2003
Sin defectos tras: 7 días para color, 1 día para lejía, aceite de oliva, alcohol, viakal y vinagre, 6 horas para jugo de limón.

CERTIFICACIONES

Topcret® ha recibido la certificación europea CE para sus productos, garantizando todos los requisitos legales y técnicos de seguridad exigidos por la Unión Europea.

También, hemos obtenido la certificación ISO 14000 cumpliendo con los estándares medioambientales, de sostenibilidad y de eficiencia energética, tanto en nuestros productos como en nuestras instalaciones. Otro objetivo es cumplir con los requisitos legales en materia de seguridad laboral.

Para ello, hemos sido certificados con los estrictos estándares del Sistema de Gestión de Seguridad y Salud en el Trabajo OHSAS 18001. Topcret® reafirma así su posición de vanguardia en el sector. Además, trabajamos con certificaciones de Applus para nuestros sistemas.

A través de los siguientes enlaces tendrás acceso a los certificados de BAXAB:

MEDIO AMBIENTE

Como empresa comprometida con la calidad de nuestros productos y al respeto del medio ambiente, es una meta ineludible hacer compatible la rentabilidad de la actividad económica con la máxima satisfacción de nuestros clientes y la preservación ambiental, considerando las interacciones de nuestros productos a lo largo de su ciclo de vida.

Gerente

FICHA TÉCNICA

Resistencia a la adherencia UNE-EN 13892-6>1,2N/mm
Dureza superficial, UNE-ENV 13892-6:200343 N/mm²
Determinación de resistencia al deslizamiento / resbalamiento de los pavimentos sin pulir UNE-ENV 12633 27
Resistencia al desgaste BCA, UNE-EN 13892-4160 µm
Resistencia al impacto, UNE-EN ISO 6272:2012>14,7 Nm
Resistencia a fuertes ataques químicos, UNE-EN 13529:205
Sin defectos después de 7 días de contacto con aceite, agua, alcohol, café y lejía. Sin defectos después de 1 día de contacto para tinte para el cabello y vinagre de alcohol. Sin defectos de 6 horas de contacto con jugo de limón.

PRINCIPALES BENEFICIOS

CERTIFICACIONES

Topcret® ha recibido la certificación europea CE para sus productos, garantizando todos los requisitos legales y técnicos de seguridad exigidos por la Unión Europea.

También, hemos obtenido la certificación ISO 14000 cumpliendo con los estándares medioambientales, de sostenibilidad y de eficiencia energética, tanto en nuestros productos como en nuestras instalaciones. Otro objetivo es cumplir con los requisitos legales en materia de seguridad laboral.

Para ello, hemos sido certificados con los estrictos estándares del Sistema de Gestión de Seguridad y Salud en el Trabajo OHSAS 18001. Topcret® reafirma así su posición de vanguardia en el sector. Además, trabajamos con certificaciones de Applus para nuestros sistemas.

A través de los siguientes enlaces tendrás acceso a los certificados de MICROCEMENTO:

FICHA TÉCNICA

Resistencia a la adherencia UNE-EN 13892-6>1,2N/mm
Dureza superficial, UNE-ENV 13892-6:200343 N/mm²
Determinación de resistencia al deslizamiento / resbalamiento de los pavimentos sin pulir UNE-ENV 12633 27
Resistencia al desgaste BCA, UNE-EN 13892-4160 µm
Resistencia al impacto, UNE-EN ISO 6272>14,7 Nm

PRINCIPALES BENEFICIOS

FICHA TÉCNICA

Resistencia a la adherencia UNE-EN 13892-8:2003-3,3 N/mm²
Dureza superficial, UNE-EN 13892-6:2003120 N/mm²
Determinación del índice de transmisión de agua líquida (permeabilidad) UNE-EN 1062-3:2008 0,01 kg/m² h0,05
Determinación de las propiedades de flexión, UNE-EN ISO 178:20031,3 kN/mm²
Resistencia al impacto, UNE-EN ISO 6272:2012 >14,7 Nm
Altura de caída a la que se observan las primeras fisuras A 1500 mm
Diámetro producido a esta altura 9,5 mm
Resistencia al desgaste BCA, UNE-EN 13892-2:2003 30 µm
Determinación de las resistencias químicas, UNE-EN 13529:2003
Sin defectos tras: 7 días para color, 1 día para lejía, aceite de oliva, alcohol, viakal y vinagre, 6 horas para jugo de limón.

PRINCIPALES BENEFICIOS