Real Metals
Real Metals collection is our exclusive line to achieve natural and real metallic finishes.
The composition of a special powder based on real metal, offers the handcrafted finish of Microcemento with its brands and its exclusive concept together with the appearance of the metals and their natural shine.
Therefore, in areas with a maximum degree of medium/high humidity, with constant exposure to steam or with direct exposure to water, it can cause excessive oxidation and vary its appearance.
Its original finish is conceptually similar to a traditional Microcemento since its process and installation technique are similar.
Due to the nature of its composition, it has been developed mainly for interior walls since there is the possibility of leaving the natural finish, without special protection and thus achieving a continuous metal surface.
With the Real Metals collection, a magical effect is achieved by producing surfaces that look like real metal. Available in zinc, aluminium, brass, bronze, copper and corten steel, our Real Metals line is an innovative solution for interior walls or furniture that will appear in your rooms as if by magic, bringing a touch of luxury, design and exclusivity.
Discover our colors
Technical Data
Description
Composition
Process
Tests and Trials
Applications
The REAL METALS collection is our exclusive line of metallic finish. It is the result of incorporating Microcement with metal powder into the composition, thus achieving a true metal effect. Due to the nature of its composition, it is suitable only for interiors, being able to be installed on both floors and walls. in areas with a maximum degree of medium humidity, as constant exposure to steam and water can cause excessive oxidation and vary its appearance.
Work Time
The product is applied by hand with a metal trowel, with semicircular and interlocking movements. The system is made up of different layers as presented in the "Composition" section. The completion time will depend on the project based on its volume and characteristics, but its installation can be considered in 1/2 days for the complete process.
Final Considerations
After installing our systems, the pavement surfaces can be ready for pedestrian traffic within 24 hours. During the first 5 days you should avoid any impact, dragging of objects or placing of heavy loads. The maximum surface hardness will be reached after 21 days following application. In the case of surfaces in contact with water, waterproofing will be reached after 48 hours of drying.
RESISTENCIA A LA ADHERENCIA, UNE-EN 13892-6:2003
Determinación de resistencia al deslizamiento/resbalamiento de los pavimientos sin pulir UNE-ENV 12633
RESISTENCIA AL DESGASTE BCA, UNE-EN 13892 - 4
RESISTENCIA AL IMPACTO: UNE-EN IOS 62722
Resistencia fuertes ataques quimicos, UNE-EN 13529:205: Sin defectos tras 7 días de contacto para aceite de oliva, agua, alcohol, café y lejía. Sin defectos tras 1 día de contacto para tintura para cabellos y vinagre de alcohol. Sin defectos tras 6 horas de contacto con jugo de limón
Interior wall
No direct contact with water
Technical Data
Description
Composition
Process
The product is applied by hand with a metal trowel, with semicircular and interlocking movements. The system is made up of different layers as presented in the "Composition" section. The completion time will depend on the project based on its volume and characteristics, but its installation can be considered in 1/2 days for the complete process.
Work Time
The product is applied by hand with a metal trowel, with semicircular and interlocking movements. The system is made up of different layers as presented in the "Composition" section. The completion time will depend on the project based on its volume and characteristics, but its installation can be considered in 1/2 days for the complete process.
Final Considerations
After installing our systems, the pavement surfaces can be ready for pedestrian traffic within 24 hours. During the first 5 days you should avoid any impact, dragging of objects or placing of heavy loads. The maximum surface hardness will be reached after 21 days following application. In the case of surfaces in contact with water, waterproofing will be reached after 48 hours of drying.
Tests and Trials
Applications
Resistencia fuertes ataques quimicos, UNE-EN 13529:205: Sin defectos tras 7 días de contacto para aceite de oliva, agua, alcohol, café y lejía. Sin defectos tras 1 día de contacto para tintura para cabellos y vinagre de alcohol. Sin defectos tras 6 horas de contacto con jugo de limón
Interior wall
No direct contact with water
Gallery
Remove Any Doubts
Is the microcement from the REAL METALS collection as strong as Microcement® or Baxab®?
Due to the existence of authentic metal in their composition, these surfaces are more delicate and less resistant to scratches.
Is it cold to the touch?
It is not as cold as metal, but at the same time, it is not as warm as microcement.
Remove Any Doubts
Is the microcement from the REAL METALS collection as strong as Microcement® or Baxab®?
Due to the existence of authentic metal in their composition, these surfaces are more delicate and less resistant to scratches.
Is it cold to the touch?
It is not as cold as metal, but at the same time, it is not as warm as microcement.
EN 
ES 
FR 
DE 
IT 
SV 
PT 
