Product: BAXAB® | Color: Perla | Architecture: Brimelow McSweeney Architects
This project is a redevelopment of an existing 14,000 sq. ft. office building located adjacent to Carnaby Street in the heart of Soho. On the ground floor, they created a new office entrance lobby along with a new 1,400sq.ft. retail unit fronting onto Marshall Street. The scheme involves the Cat A office fit-out of the upper floors ready for occupation by the new tenants.
The building was stripped back to its reinforced concrete shell. This meant the floor levels were uneven and the floor surface was jagged and with holes throughout. The conventional solution would be to pour screed over to the height that was needed and lay a flooring system over the top, but because this would have to be laid over all 5 floors the costs and logistics of getting the screed up to these floors financially unviable. The screed option also had a detrimental on the length of the project due to the drying time needed.
Topcret’s solution was to lay a quick-drying self-levelling screed over the floor base this was to level the floor and raise it to the required height.
Afterward, we applied a two-layer system of Epoxy resin with Elasticated matting to give a firm base for which to lay Topcret’s BAXAB on the floor.
The advantage of this solution over the screed system is that by using the Topcret system, each floor and wall was laid in 1 week which allowed other trades access, speeding up the site’s program. The added advantage was the cost-saving.
CONTACT
NEWSLETTER
PROFESIONALS
COMPANY
CONTACT
NEWSLETTER
ADHERENCE RESISTANCE, UNE-EN 13892-8: 2003 | >3,3 N/mm2 |
SURFACE HARDNESS, UNE-EN 13892-6: 2003 | 120 N/mm2 |
LIQUID WATER PERMEABILITY UNE-EN 1062-3:2008 | 0,01 kg/m2 h0,05 |
BENDING PROPERTIES, UNE-EN ISO 178:2003 | 1,3 kN/mm2 |
RESISTANCE TO IMPACT: UNE-EN ISO 6272:2012 | >14,7 NmA |
FALL HEIGHT AT WHICH THE FIRST CRACKS ARE OBSERVED: | 1500 mm |
DIAMETER AT THIS LEVEL: | 9,5 mm |
WEAR RESISTANCE BCA, UNE-EN 13892-2: 2003 | 30 µm |
Topcret® commits to repair or replace at no cost for a period of 3 years any type of defect that may arise. Warranty also extends to the application process.
Topcret has an exclusive rework insuarance,through which you can access a lifetime bonus to redo your work whenever you want. This insurance covers all those cases that are not covered by the Zero Cost Guarantee, even if there were no defects or accidents, such as changing the color of the applied coating.
Topcret® commits to repair or replace at no cost for a period of 3 years any type of defect that may arise. Warranty also extends to the application process.
Topcret has an exclusive rework insuarance,through which you can access a lifetime bonus to redo your work whenever you want. This insurance covers all those cases that are not covered by the Zero Cost Guarantee, even if there were no defects or accidents, such as changing the color of the applied coating.
The installation process is carried out with our own applicators, trained in our academy.
This allows us to guarantee the result and compliance with the agreed delivery times. In addition, we are manufacturers, so we sell only products that we have in stock.
The installation process is carried out with our own applicators, trained in our academy.
This allows us to guarantee the result and compliance with the agreed delivery times. In addition, we are manufacturers, so we sell only products that we have in stock.
The commercial process includes on site visits by our trained applicators, we make sure that what was agreed is what will finally happen. No surprises, no hidden fees.
The commercial process includes on site visits by our trained applicators, we make sure that what was agreed is what will finally happen. No surprises, no hidden fees.
Todas las especificaciones técnicas que necesitas
"*" indicates required fields
All the technical specifications you need
"*" indicates required fields
"*" indicates required fields
ADHERENCE RESISTANCE, UNE-EN 13892-8: 2003 | >3,3 N/mm2 |
SURFACE HARDNESS, UNE-EN 13892-6: 2003 | 120 N/mm2 |
LIQUID WATER PERMEABILITY UNE-EN 1062-3:2008 | 0,01 kg/m2 h0,05 |
BENDING PROPERTIES, UNE-EN ISO 178:2003 | 1,3 kN/mm2 |
RESISTANCE TO IMPACT: UNE-EN ISO 6272:2012 | >14,7 NmA |
FALL HEIGHT AT WHICH THE FIRST CRACKS ARE OBSERVED: | 1500 mm |
DIAMETER AT THIS LEVEL: | 9,5 mm |
WEAR RESISTANCE BCA, UNE-EN 13892-2: 2003 | 30 µm |
DETERMINATION OF CHEMICAL RESISTANCE, UNE-EN 13529:2003 No defects up to: 7 days for chlorine; 1 day for bleanch, olive oil, alcohol, viakal and vinegar; 6 hours for lemon juice. |
Topcret® has received the European CE certification for their products, guaranteeing all legal and technical security requirements requested by the European Union.
Also, we have obtained the ISO 14000 certification complying with environmental, sustainability and energy efficiency standards, both in our products and facilities. Another goal is meeting the legal requirements in terms of work safety.
To this end, we have been certified with the strict OHSAS 18001 Occupational Health and Safety Management System standards. Topcret® reinsures in this way its state of the art position in the sector. Moreover, we work with Applus certifications for our systems.
Through the following links you will have access to the BAXAB certificates:
As a company committed to the quality of our products and respect for the environment, it is an unavoidable goal to make the profitability of economic activity compatible with the maximum satisfaction of our customers and environmental preservation, considering the interactions of our products throughout its life cycle.
Director
ADHESION RESISTANCE, UNE-EN 13892-6 | >1,2N/mm |
SURFACE HARDNESS, UNE-EN 13892-6:2003 | 43 N/mm² |
SLIP RESISTANCE UNE-ENV 12633 | 27 |
WEAR RESISTANCE BCA, UNE-EN 13892-4 | 160 µm |
IMPACT RESISTANCE, UNE-EN ISO 6272 | >14,7 Nm |
RESISTANCE TO STRONG CHEMICAL ATTACKS, UNE-EN 13529:205
No defects after 7 days of contact for olive oil, water, alcohol, coffee and lye. No defects after 1 day of contact for hair dye and alcohol vinegar. No defects after 6 hours of contact for lemon juice. |
Topcret® has received the European CE certification for their products, guaranteeing all legal and technical security requirements requested by the European Union.
Also, we have obtained the ISO 14000 certification complying with environmental, sustainability and energy efficiency standards, both in our products and facilities. Another goal is meeting the legal requirements in terms of work safety.
To this end, we have been certified with the strict OHSAS 18001 Occupational Health and Safety Management System standards. Topcret® reinsures in this way its state of the art position in the sector. Moreover, we work with Applus certifications for our systems.
Through the following links you will have access to the MICROCEMENTO certificates:
ADHESION RESISTANCE, UNE-EN 13892-6 | >1,2N/mm |
SURFACE HARDNESS, UNE-EN 13892-6:2003 | 43 N/mm² |
SLIP RESISTANCE UNE-ENV 12633 | 27 |
IMPACT RESISTANCE, UNE-EN ISO 6272 | 160 µm |
WEAR RESISTANCE BCA, UNE-EN 13892-4 | >14,7 Nm |
ADHERENCE RESISTANCE, UNE-EN 13892-8: 2003 | -3,3 N/mm² |
SURFACE HARDNESS, UNE-EN 13892-6: 2003 | 120 N/mm² |
LIQUID WATER PERMEABILITY UNE-EN 1062-3:2008 | 0,01 kg/m² h0,05 |
BENDING PROPERTIES, UNE-EN ISO 178:2003 178:2003 | 1,3 kN/mm² |
RESISTANCE TO IMPACT: UNE-EN ISO 6272:2012 | >14,7 Nm |
FALL HEIGHT AT WHICH THE FIRST CRACKS ARE OBSERVED: | A 1500 mm |
DIAMETER AT THIS LEVEL: | 9,5 mm |
WEAR RESISTANCE BCA, UNE-EN 13892-2: 20003 | 30 µm |
CHEMICAL RESISTANCE, UNE-EN 13529
Without defects after 3 days, Olive oil, Red wine, Alcohol, Hair dye, Vinegar viakal, Lemon jouce. |